Archive for May, 2014

Midnight Robot at the Tradeshow

It was a smallish show, as trade shows go. Only around 50,000 square feet of exhibits. It was kind of a cool show though – the Denver Mini Maker Faire. There were around 150 exhibitors, showing off bleeding-edge new technology alongside seriously retro-tech. A perfect environment for the use of autonomous mobile security robots.

The security robot is on patrol in a high tech exhibit area. Protecting hundreds of thousands of dollars of exhibits overnight.

The security robot is on patrol in a high tech exhibit area, protecting hundreds of thousands of dollars of exhibitor’s equipment overnight.

The Vigilant robot wasn’t the only ‘bot there – not by a long shot. The difference was that the other robots were shut down, and would remain so until the show opened again at 9 am the next day. The Vigilant security robot was working. It was about half way through a 12 hour shift as part of the overnight security team. The facility is part of Denver’s National Western Complex, and this is the third event in the last 18 months for which Gamma 2 Robotics‘ robots have provided security. It is almost like coming home for the robots. Of course the exhibit layout was different – every show has its own layout. But it took less time to configure the robot for the new layout than it took the exhibitors to move in, so the robot was ready to roll long before the doors were locked for the night.

This morning (it’s around 2am) the robot is rolling past 3-D printers, air cannons, massive lasers, computer controlled sewing machines, CNC routers, and of course dozens of other robots; but as I said, they are here as displays, while the security robot is doing its job – mile after mile of dull patrolling. As it patrols, it scans for unexpected motion, high temperatures, boxes blocking aisles: the kinds of things that might indicate a potential problem, a potential intruder.

Last night was quiet, just like tonight will probably be. That’s one of the hardest things about the night security job. 99.9% of the time – nothing ever happens, and that is the core problem. It is really hard for people to stay focused, to stay vigilant, when there is nothing to focus on. That’s something computers and robots are good at. The Vigilant robot doesn’t care that it has been up and down this aisle every 10 minutes for the last 7 hours, or for the 12 hours last night. It still does its job of patrolling, observing, and reporting, because that is what is needed to protect lives and property.

For those of you who are numbers people, the robot patrols a 25,000 square foot area, and has four patrols configured. These range from covering the full exhibit area, down to a 5 minute detail scan of the ‘high value’ section. This area is only 8000 square feet but loaded with high tech. The robot is on duty for a 12 hour shift without needing any ‘down time’ for recharging. During its shift the Vigilant robot will travel around 8 miles. It doesn’t move fast – but it just keeps patrolling all night long: keeping its electronic sensors on all the high tech machines on display.

This show is loaded with cutting edge equipment. Between the 3-D scanners, 3-D printers, Laser engravers and loads of artwork, there is at least $250,000 worth of displays and technology here tonight. Next week it will be a different event with a different theme, but the same key problems – keeping the exhibitors and their property safe. But that is no problem for the security robot. It ‘knows’ what its job is and it just keeps patrolling, keeping things safe, Always Vigilant.

 


Where is your robot?  Ours were at work protecting the exhibits at a major show in Denver.

Want More information about the Vigilant Security Robots?  Here is our website.


, , , , , ,

1 Comment

Learning about Security Robots and Physical Security

We have been invited to an exciting event – the Physical Security Showcase and Luncheon hosted by the Kansas City chapter of ASIS International on June 05, 2014.

Security robots and janitorial workers sharing the corridor on the night shift.

Security robots and janitorial workers sharing the corridor on the night shift.

We will do an educational talk about real world applications of mobile robotics in the security field – what is possible, and what is still science fiction. As experts in the field of Security Robotics we believe that it is critical to have the knowledge to separate the hype from the reality. This is key to making informed decisions about the real benefits of putting security robots to work.

We will be one session of several focusing on cutting edge technology and culminating with a presentation by the FBI on “FBI Security Technology as related to Investigations” By FBI Supervisor Patricia Sola.

So, if you are in the Kansas City area – this is the event to attend! If you are not in the KC area – you should get here for this event! Besides – we will have Gamma 2 Robotics Vigilant Mobile Security Robots on display!

 

Where is your robot?  Ours will be invading Kansas City for the Physical Security Showcase in June!

Learn more about our technology

 

, , , ,

Leave a comment